6.3.20.1
Street BLPU Records must be created for each type 1 and type 2 Street and can be created for type 3, 4 and 9 Streets recorded in the ASG.
6.3.20.2
Street BLPUs are for linking attribute data to incidents at that Street such as community safety incidents, noise complaints and environmental health cases.
6.3.20.3
PAO_TEXT for a Street BLPU must take the form of a textual description of ‘Street Record’. The name of the Street must not be recorded within the PAO_TEXT Field.
6.3.20.4
A Street BLPU must only have an Approved Preferred LPI unless the new Street has been officially named and the construction work has yet to commence. See Section 6.3.20.6.
6.3.20.5
Alternative LPIs must not be recorded against Street BLPUs.
6.3.20.6
Where a new Street has been officially named and the construction work has yet to commence the Street BLPU LOGICAL_STATUS = 6 – Provisional, must be used and a Street STATE = 5 – Street for addressing purposes only, must also be used.
6.3.20.7
The following preferred rules should be applied when a Street BLPU Record is created:
- Assign the coordinates from the Easting and Northing coordinates associated with the start of the referenced Street, as defined in Section 5.3.
- Use RPC = 4.
- Use Classification BLPU_CLASS = “PS”.
6.3.20.8
However, if a Street is longer than 750m the following rules may be applied:
- Assign the coordinates from the Easting and Northing coordinates associated with the mid-point of the level 3 Street carriageway between the start and end points, as defined in Section 5.3.
- Use RPC = 1.
- Use Classification BLPU_CLASS = “PS”.